恒泰石油树脂MSDS

MATERIAL SAFETY DATA SHEET

DATE PREPARED: SEP 3, 2009 MSDS NO.: 090317 PHT 3 SERIES (SEE SECTION 16)

PRODUCT NAME: PHT 3 Series (See Section 16)

CHEMICAL NAME: PETROLEUM RESIN

CHEMICAL FAMILY: PETROLEUM RESIN PRODUCT DESCRIPTION: Pale yellow to amber solid

CAS NO.: 68410-16-2 _____________________________________________

CONTACT ADDRESS: PUYANG HENGTAI PETROCHEMICAL INDUSTRY CO.,LTD WEST SECTION OF PUSHANG ROAD,PUYANG,HENAN,CHINA

P.O. Box 457000

CONTECT PERSON: WEI HAN

_____________________________________________________________________

The composition of this mixture may be proprietary information. In the

event of a medical emergency, compositional information will be provided

_____________________________________________________________________

to a physician or nurse. POTENTIAL HEALTH EFFECTS

EYE CONTACT: Irritating, and will injure eye tissue if not removed promptly.

SKIN CONTACT:

Frequent or prolonged contact may irritate. Low order of toxicity. Exposure to hot material may cause thermal burns and adhesion of the

INHALATION: Negligible hazard at ambient temperature (-28 to 58 Deg C; 0 to 130 Deg

C) solidified product to the skin.

Vapors and/or aerosols which may be formed at elevated temperatures may be irritating to eyes and respiratory tract.

INGESTION: Low order of toxicity. _____________________________________________________________________

EYE CONTACT: Immediately flush eyes with large amounts of water for at least 15 minutes. Get prompt medical attention.

SKIN CONTACT: Flush with large amounts of water; use soap if available. For hot product, immediately immerse in or flush the affected area with sheeting or gauze and get prompt medical attention. No attempt should

be made to remove material from skin or to remove contaminated clothing,

large amounts of cold water to dissipate heat. Cover with clean cotton as the damaged flesh can be easily torn.

INHALATION: In case of adverse exposure to vapors and/or aerosols formed at elevated temperatures, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention.

INGESTION: First aid is normally not required.

FLASH POINT: 290 Deg C. METHOD: ASTM D92 NOTE: Minimum

FLAMMABLE LIMITS: NOTE: Not Applicable AUTOIGNITION TEMP:

NOTE: Not Applicable

GENERAL HAZARD Solid material, may burn at or above the flashpoint, and airborne dust

Static Discharge, material can accumulate static charges which can

may explode if ignited . cause an incendiary electrical discharge .

FIRE FIGHTING Use water spray to cool fire exposed surfaces and to protect personnel. Isolate "fuel" supply to fire. Extinguish the fire by cooling with water spray.

DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS No unusual

LAND SPILL Eliminate sources of ignition. Prevent additional discharge of

material,if possible to do so without hazard. For small spills implement

cleanup procedures; for large spills implement cleanup procedures and,

Recover spilled material and place in suitable containers for recycle if in public area, keep public away and advise authorities.

or disposal. Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.

WATER SPILL Prevent additional discharge …… 此处隐藏：6075字，全部文档内容请下载后查看。喜欢就下载吧 ……