s3c2440的LCD字符显示(2)

#define rGPDCON (*(volatile unsigned *)0x56000030) //Port D control

#define rGPDDAT (*(volatile unsigned *)0x56000034) //Port D data

#define rGPDUP (*(volatile unsigned *)0x56000038) //Pull-up control D

#define rGPGCON (*(volatile unsigned *)0x56000060) //Port G control

#define rGPGDAT (*(volatile unsigned *)0x56000064) //Port G data

#define rGPGUP (*(volatile unsigned *)0x56000068) //Pull-up control G

#define rLCDCON1 (*(volatile unsigned *)0x4d000000) //LCD control 1

#define rLCDCON2 (*(volatile unsigned *)0x4d000004) //LCD control 2

#define rLCDCON3 (*(volatile unsigned *)0x4d000008) //LCD control 3

#define rLCDCON4 (*(volatile unsigned *)0x4d00000c) //LCD control 4

#define rLCDCON5 (*(volatile unsigned *)0x4d000010) //LCD control 5

#define rLCDSADDR1 (*(volatile unsigned *)0x4d000014) //STN/TFT Frame buffer start address 1

#define rLCDSADDR2 (*(volatile unsigned *)0x4d000018) //STN/TFT Frame buffer start address 2

#define rLCDSADDR3 (*(volatile unsigned *)0x4d00001c) //STN/TFT Virtual screen address set

#define rLCDINTMSK (*(volatile unsigned *)0x4d00005c) //LCD Interrupt mask

#define rTCONSEL (*(volatile unsigned *)0x4d000060) //LPC3600 Control --- edited by junon

#define LCD_WIDTH 320