VW 10514 (2002-11-01)_EN(3)

标准

Page 3

VW 105 14: 2002-11

Figure 1 – Design C Volkswagen AG logo

(table 2) Figure 2 – Design O Volkswagen AG logo

(VW 105 10)

Figure 3 – Design D

Audi AG logo (VW 105 13)

Figure 4 – Design A

Combined Volkswagen AG and Audi AG logo

(table 2 and VW 105 13)

Figure 5 – Design B

Combined Volkswagen AG and Audi AG logo

(table 2 and VW 105 13)

Designation of a design C logo with a nominal diameter of d1 = 10 mm: Logo VW 105 14 – C 10 2)

Designation of a design A logo with a nominal diameter of d1 = 10 mm: Logo VW 105 14 – A 10 2)

Table 2 - Dimensions for designs A, B and C (mm)

Nominal diameter

d1

d2

d3a

c f1)

1) In cases when a bore or a step does not permit to use designs A or B, distance "f" may be modified.

Definition of dimensions: d2=0.67 d1; d3=1.163 d1; a=0.085 d1; b=0.1 d1; f=0.167 d1; c=0.025 d1

2)

The type of mounting (i.e. cast, struck, etched, embossed, stamped, eroded, raised or recessed) shall be specified in

the drawing. If not stated, the choice is left to the manufacturer.