太原理工大学
毕业设计(论文)
设计说明书
设计(论文)题目:
交通信号灯的PLC控制
学生:赵卓力
专业:自动化
班级:04-1班
指导教师:李国勇
设计日期:2008年6月18日
太原理工大学毕业设计(论文)任务书
摘要
本论文主要针对十字路口的交通信号灯的设计,根据控制要求确定所需的用户输入、输出设备,据此确定PLC的I/O点数, 选择PLC系统, 分配PLC I/O点,设计I/O 连接图,利用S7-200设计出相应的程序模块。在熟悉S7系列和交通信号灯流程的基础上,针对十字路口自形设计出智能的交通信号灯,包括急转急停,强制停车和强制通行来应对各种紧急交通状况。利用S7-300设计出相应的系统程序模块,并进行相应的动态仿真。80年代以来,世界各发达国家虽然已经基本建成了四通八达的现代化国家道路网,但随着社会经济的发展,路网通过能力已满足不了交通量增长的需要,交通拥挤和堵塞现象日趋严重,交通污染与事故越来越引起社会的普遍关注。经过长期和广泛的研究,这些发达国家已从主要依靠修建更多的道路、扩大路网规模来解决日益增长的交通需求,逐渐转移到用高新技术来改造现有的道路运输系统及其管理体系,从而大幅度地提高了路网的通行能力和服务质量。
关键词道路拥堵 PLC 智能交通系统
- I -
Abstract
In this paper, the main crossroads of traffic lights for the design, determine the necessary requirements under the control of the user input and output devices, which identify the PLC I / O points, select the PLC system, distribution of PLC I / O, the design of I / O Connection plans, use of S7-200 to design the appropriate procedures module. S7 in a familiar series of processes and traffic lights, on the basis of self-crossroads for intelligent design to the traffic lights, including Sharp exigency stop, stop forced and compulsory use of emergency to deal with various traffic conditions. S7-300 used to design the appropriate system procedures module, and the corresponding dynamic simulation. Since the 1980s, although the world's least developed countries have basically built a modern country extensive road network, but with the social and economic development, China Netcom road capacity has been failed to meet the needs of traffic growth, traffic congestion and to plug the growing phenomenon Serious pollution and traffic accidents caused more widespread attention in the community. After a long and extensive research, these developed countries have relied mainly on the construction of more roads, expand the scale of the network to address the growing traffic demand, and gradually shifted to use high technology to transform the existing road transportation systems and their management system, Thus significantly increase the traffic capacity of the network and service quality
Key words:road traffic congestion problems plc Transportation System
- II -
目录
摘要 .................................................................... I Abstract ................................................................ II 1. 绪论 (1)
1.1课题背景 (1)
1.2交通灯的发展概况 (3)
1.2.1红绿灯的发展史 (3)
1.2.2公路交通中PLC的应用 (4)
1.2.3 PLC的发展趋势 (5)
1.3本文的主要研究内容 (7)
1.4智能交通的构想 (7)
2 .PLC的简介 (8)
2.1PLC的概述 (8)
2.2基本结构及原理 (9)
2.3系统介绍 (14)
3.交通灯功能的实现 (15)
3.1系统流程图 (15)
3.2时序图 (16)
3.3程序设计解析 (16)
3.4 交通灯IO接线 (21)
4.智能系统设计 (23)
4.1车流量的检测方法 (23)
4.2十字路口交通模型 (27)
4.3系统功能流程图 (27)
4.4程序设计 (30)
4.5系统的仿真 (36)
5.软件的使用与调试 (37)
5.1 STEP7程序的使用 (37)
5.2 WINCC程序的使用 (37)
6.总结 (47)
6.1系统设计总结 (47)
6.2系统扩展 (47)
6.3未来智能交通系统的构想 (47)
致谢 (49)
参考文献 (50)
附录一外文参考资料 (52)
附录二中文翻译 (57)
- i -
1. 绪论
1.1课题背景
随着世界范围内城市化和机动化进程的加快,城市交通越来越成为一个全球化的问题。城市交通基础设施供给滞后于高速机动化增长需求,道路堵塞日趋加重,交通事故频繁,环境污染加剧等问题普遍存在。特别是在一些发展中国家,不仅没有在城市规划布局、城市交通发展模式选择与运营机制等方面吸取发达国家城市交通发展的经验与教训,而且重复着它们在高速机动化发展中所犯过的许多错误,无论是大中城市还是新兴的中小城市,几乎都没有前瞻性地解决好城市交通问题。自改革开放以来,我国的城市规模和经济建设都有了飞速的发展,城市化进程在逐步加快,城市人口在急剧增加,大量流动人口涌进城市,人员出行和物资交流频繁,使城市交通面临着严峻的局势。当前,全国大中城市普遍存在着道路拥挤、车辆堵塞、交通秩序混乱的现象。如何解决城市交通问题已成为全社会关注的焦点和大众的迫切呼声。探究城市交通发展中存在问题的原因,无论是从宏观上还是从微观上分析,其根本原因在于城市交通系统的管理机制不适应。
不同的城市有不同城市的问题,但共性就是混合交通流问题。在交叉口如何解决混合交通流中的相互影响或彼此的相互影响,就是解决问题的关 …… 此处隐藏:10654字,全部文档内容请下载后查看。喜欢就下载吧 ……