AEC_Q100_Rev_G_Base_Document(5)

车用电子产品的执行标准。

AEC - Q100 - REV-G

May 14, 2007

Automotive Electronics Council

Component Technical Committee

Industrial

JEDEC JESD-22 Reliability Test Methods for Packaged Devices EIA/JESD78 IC Latch-Up Test

UL-STD-94 Tests for Flammability of Plastic materials for parts in Devices and Appliances

Mount Devices

1.3

1.3.1

Definitions

AEC Q100 Qualification

Successful completion and documentation of the test results from requirements outlined in this document allows the supplier to claim that the part is “AEC Q100 qualified”. The supplier, in agreement with the user, can perform qualification at sample sizes and conditions less stringent than what this document requires. However, that part cannot be considered “AEC Q100 qualified” until such time that the unfulfilled requirements can be completed.

Approval for Use in an Application

"Approval" is defined as user approval for use of a part in their application. The user's method of approval is beyond the scope of this document.

Definition of Part Operating Temperature Grade

The part operating temperature grades are defined below:

Grade 0: -40°C to +150°C ambient operating temperature range Grade 1: -40°C to +125°C ambient operating temperature range Grade 2: -40°C to +105°C ambient operating temperature range Grade 3: -40°C to +85°C ambient operating temperature range Grade 4: 0°C to +70°C ambient operating temperature range

2. 2.1

GENERAL REQUIREMENTS Objective

The objective of this specification is to establish a standard that defines operating temperature grades for integrated circuits based on a minimum set of qualification requirements.

Page 2 of 32