手机版

EN10025-5-2005(16)

时间:2025-07-10   来源:未知    
字号:

EN 10025-5:2004 (E)

for all products the ladle analysis; for all products the tensile test;

for all products of quality J0, J2 and K2 of the steel grades S235 and S355, class W, the impact test.

At the time of the order the following additional tests can be agreed:

8.4.2

a) for all products of steel grade S355, class WP, the impact test (see 7.3.2.2); See option 3.

b) the product analysis (see 8.3.3.2 of EN 10025-1:2004). See option 2.

9 Preparation of samples and test pieces

9.1 Selection and preparation of samples for chemical analysis

The preparation of samples for product analysis shall be in accordance with EN 10025-1.

9.2 Location and orientation of samples and test pieces for mechanical tests

9.2.1 General

The location and orientation of samples and test pieces for mechanical tests shall be in accordance with EN 10025-1.

9.2.2 Preparation of samples

In addition to EN 10025-1 the samples shall be taken:

from the thickest product in the test unit except for flat products of quality J0, for which the samples are taken from any product of the test unit; from any product of the test unit for products of the qualities J2 and K2 and for products in delivery condition +N (see 3.1). 9.2.3 Preparation of test pieces

The preparation of test pieces for mechanical tests shall be in accordance with EN 10025-1.

9.3 Identification of samples and test pieces

The identification of samples and test pieces shall be in accordance with EN 10025-1.

10 Test methods

10.1 Chemical analysis

The chemical analysis shall be in accordance with EN 10025-1.

13

EN10025-5-2005(16).doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印
×
二维码
× 游客快捷下载通道(下载后可以自由复制和排版)
VIP包月下载
特价:29 元/月 原价:99元
低至 0.3 元/份 每月下载150
全站内容免费自由复制
VIP包月下载
特价:29 元/月 原价:99元
低至 0.3 元/份 每月下载150
全站内容免费自由复制
注:下载文档有可能出现无法下载或内容有问题,请联系客服协助您处理。
× 常见问题(客服时间:周一到周五 9:30-18:00)