EN 10025-5:2004 (E)
10.2 Mechanical tests
The mechanical tests shall be in accordance with EN 10025-1.
10.3 Ultrasonic testing
Ultrasonic testing shall be carried out in accordance with EN 10025-1.
10.4 Retests
The retests shall be in accordance with EN 10025-1.
11
Marking, labelling, packaging
The marking, labelling and packaging shall comply with EN 10025-1. See option 10.
12 Complaints
Any complaints shall be dealt with in accordance with EN 10025-1.
13 Options (see 5.2)
The following options of EN 10025-1:2004 apply:
1) 2) 3) 4) 6) 7) 8) 9) 10)
The steel making process shall be indicated (see 6.1).
Product analysis shall be carried out; the number of samples and the elements to be determined
shall be as agreed (see 7.2.2, 8.3.3 and 8.4.2).
The impact properties of steel grade S355, class WP, shall be verified (see 7.3.2.2 and 8.4.2). Products of quality J2 and K2 shall comply with one of the improved properties perpendicular to the surface of EN 10164 (see 7.3.3).
For flat products in thickness 6 mm the freedom from internal defects shall be verified in accordance with EN 10160 (see 7.6 and 10.3).
For H beams with parallel flanges and IPE beams the freedom from internal defects shall be verified in accordance with EN 10306 (see 7.6 and 10.3).
For bars the freedom from internal defects shall be verified in accordance with EN 10308 (see 7.6 and 10.3).
Inspection of surface condition and dimensions shall be witnessed by the purchaser at the manufacturer's works (see 8.2).
The type of marking required (see Clause 11).
In addition to the options of EN 10025-1:2004 the following options apply to products according to EN 10025-5:
11c) Sheet, plate, strip, wide flats and flats (width < 150 mm) with a nominal thickness ≤ 20 mm shall be
suitable for flanging without cracking (see 7.4.2.2).
14